Anti-dropping device using the instructions and precautions

Must be properly chosen Ropes, non-mixed. Must correctly install self-locking wheel (Alice out parts) in the upper part.
2 before installing exit the insurance screw the the claw shaft opening direction pawl wheel assembly counter-clockwise direction to exit. The opening direction clockwise loaded loaded Ropes. And then close the insurance, the insurance screw on (not too tight).
3. Loaded mainline should test the self-locking device on the upper and lower flexibility, such as decline in the self-locking device is not flexible, and may be half Lahuang appropriate adjustment. 1 to 3 times and try to lock to ensure the locking function such as unusual, you must stop using; contact with the factory (in a one-year period), handling repairs prohibited. After one year of use, shall be taken 1 to 2 wear a large self-locking, with 80kg weights Falling impact testing, without exception, can continue to use the batch of 3 months. Since then, every three months, depending on use to do the test. Tested or prohibited the use of heavy impact products.
5. Use of anti-dropping device address safety rope, the appearance of the check-ups, and try to lock 2 to 3 times (test lock method: Pull out the safety rope at normal speed should be issued "despair", "despair" sound; hard yank the safety rope should be able to lock the safety rope should be able to let go when the automatic recovery within the device, such as the safety rope is not fully recovered, just slightly pulled out some of the safety rope can). If abnormal stop.
Anti-dropping device tilt job on the principle of inclination of not more than 30, 30 or more must consider the possibility of impact to the surrounding objects. The key parts of the anti-dropping device I do wear-resistant, corrosion resistance and other special treatment by strict debugging, without adding lubricant to use. Use in non-safety rope kink. Do not disassemble modified. And should be placed on the dry place less dust.
Anti-dropping device must be low - hanging, suspended above the user should be sturdy structures on the blunt edge. Sealed aluminum alloy shell anti-dropping device caused due to the change in the rate of self-control, a new patented safety products. By anti-ratchet dual disc brake system, the effective control of the body out of control fall.
Anti-dropping job can easily pull out the rope used. The case does not affect the normal operation of the normal up and down (less than 2 meters per second).
9 anti-falling objects falling speed difference of self-control, low - hanging. Simply sturdy nylon sling across the top of the structures on the blunt side of the nylon rope of steel hooks hanging the "n"-shaped ring, iron hook hanging rope into the semi-circle of safety belt use ready to use. In the use of the radius, no need to replace the suspension point.
10 anti-dropping device during normal use, the safety rope with human freedom scalable. Within the institutional roles, at the semi-state of tension, and maybe feeling operator. Slip in case of fall, security hove out significantly faster, the inside lock system that automatically lock. Security hove a distance of not more than 0.2 m, the impact is less than 2949N stumble staff unharmed. The load lifting of automatically resume work. The the safety rope work is completed automatically recovered inside, easy to carry. Stable lock, high safety factor, good reliability, and effectively address the cause of the accident because of the tilt jobs fall swing overly large impact other objects.